Frequently Asked Questions

Dongle Plus

  • How to put the device with router firmware into the pairing mode?

    Just press and hold the Boot button for more than 8 seconds and then release it. When you see the green light flashing, you will enter the pairing mode. 

  • Devices supported by SONOFF Zigbee Dongle Plus

    SONOFF Zigbee Dongle Plus works great with most Zigbee devices, including popular brands like Sonoff, Aqara, Philips Hue, Huawei, IKEA, Tuya, and many more, mainly depends on the home automation platform on which the user uses dongle Plus:
    ZHA: https://www.home-assistant.io/integrations/zha

    Zigbee2MQTT: https://www.zigbee2mqtt.io/guide/supported-hardware.html
    ioBroker: https://github.com/Jey-Cee/ioBroker.deconz
    Domoticz:https://github.com/Smanar/Domoticz-deCONZ
    Openhab:https://www.openhab.org/addons/bindings/deconz/
    Jeedom: https://compatibility.jeedom.com/index.php?v=d&p=home&protocol=Zigbee

    In addition to check the supported devices through the official platform, you also can view Blakadder compatibility lists which provides an extensive overview of the devices supported by different platforms. 

  • How many devices can Sonoff Zigbee 3.0 USB dongle support

    50 children Zigbee devices can be directly added to the ZBDongle-P in coordinator mode and max 200 zigbee devices with routers

    30 children Zigbee devices can be directly added to the ZBDognle-E in coordinator mode and extra 30 zigbee devices with a router, no limit on firmware but depends on platforms 

  • What is the difference between ZBDongle-P and ZBDongle-E

    The main differences between ZBDongle-P and ZBDongle-E are the chip and the supported platform. ZBdongle-P uses CC2652P while ZBDongle-E EFR32MG21, and ZBDongle-E supports Openhab but ZBDongle-P doesn't support yet. 

  • Can I run 2 Dongles with ZHA and Zigbee2MQTT on the same machine together

    Yeah, you can run two dongles at the same time. One in ZHA, the other one in Z2M, as long as you can uniquely identify them on the USB ports and keep separate Zigbee channels, ZHA defaults to 15, Z2M defaults to 11 

  • Can I run Zigbee2MQTT and ZHA together on the same Dongle plus?

    No. Z2M and ZHA are the same protocol (Zigbee). You can run one or the other, or buy a second dongle and run both on separate dongles.  

  • Can I run 2 Dongles with ZHA simultaneously

    No, Users can only add one ZHA integration to Home Assistant (but HA can connect to multiple deCONZ or Zigbee2MQTT instances).   

  • How to flash Zigbee dongle plus as Router?

    Zigbee dongle plus is pre-installed with coordinator firmware, which can only be used to add sub-devices and cannot be added by other gateways (the Zigbee protocol stipulates that there can only be one gateway in each Zigbee network).

    If you need to expand the Zigbee signal range, you can flash the router firmware using the Sonoff Dongle Flasher web tool., Zigbee dongle plus running routing firmware will disguise itself as a light bulb 

  • How to check the firmware of SONOFF dongle plus and flash the firmware

    You can use the official Sonoff Dongle Flasher web tool to check for the latest firmware and flash your device.

  • Do I need a USB extension cable

    It's highly recommended using a USB extension cable between your USB port and your Zigbee dongle plus to minimise interferences.
     

Dongle-M

  • About the Web Console

    • Unable to access via Dongle-M.local default domain? Please try accessing through the IP address instead. 
    • Forgot Web Console password? Select "Forgotten Your Password" at login, then double-click the button on Dongle-M to reset the password. 
    • Accessing multiple Dongle-M devices? If there are multiple Dongle-M devices on your network, you can switch between them from the top-left corner of the Web Console. 
  • How to check the firmware of Dongle Max and flash the firmware?

    You can update the device directly in the Web Console -- Firmware. Alternatively, enable Automatic Updates, and the device will update automatically when a new version is available. 

  • Can I run 2 Dongles with ZHA simultaneously?

    No. Users can only add one ZHA integration to Home Assistant (but HA can connect to multiple deCONZ or Zigbee2MQTT instances).
     

  • Can I run 2 Dongles with ZHA and Zigbee2MQTT on the same machine together?

    Yeah, you can run two dongles at the same time. One in ZHA, the other one in Z2M, as long as you can uniquely identify them on the USB ports and keep separate Zigbee channels, ZHA defaults to 15, Z2M defaults to 11. 

  • Can I run Zigbee2MQTT and ZHA together on the same Dongle Max?

    No. Z2M and ZHA are the same protocol (Zigbee). You can run one or the other, or buy a second dongle and run both on separate dongles.  

  • Devices supported by SONOFF Zigbee Dongle Max?

    SONOFF Dongle Plus MG24 works great with most Zigbee devices, including popular brands like Sonoff, Aqara, Philips Hue, Huawei, IKEA, Tuya, and many more, mainly depending on the home automation platform on which the user uses Dongle Plus: 

    ZHA: https://www.home-assistant.io/integrations/zha

    Zigbee2MQTT: https://www.zigbee2mqtt.io/guide/supported-hardware.html

    ioBroker: https://github.com/Jey-Cee/ioBroker.deconz

    Domoticz: https://github.com/Smanar/Domoticz-deCONZ

    OpenHAB: https://www.openhab.org/addons/bindings/deconz/

    Jeedom: https://compatibility.jeedom.com/index.php?v=d&p=home&protocol=Zigbee

    In addition to check the supported devices through the official platform, you also can view Blakadder compatibility lists which provides an extensive overview of the devices supported by different platforms. 

Dongle-PMG24

  • What is the function of the USB extension cable?

    The Dongle Plus MG24 package includes a 1m USB extension cable. It helps the Dongle connect to USB ports in different positions more easily and reduces interference.
     

  • How to check the firmware of SONOFF Dongle Plus MG24 and flash the firmware?

    You can use the official Sonoff Dongle Flasher web tool to check for the latest firmware and flash your device. 

  • How to flash Dongle Plus MG24 as Router?

    Dongle Plus MG24 is pre-installed with coordinator firmware, which can only be used to add sub-devices and cannot be added by other gateways (the Zigbee protocol stipulates that there can only be one gateway in each Zigbee network).

    If you need to expand the Zigbee signal range, you can flash the router firmware using the SONOFF Dongle Flasher web tool, Dongle Plus MG24 running routing firmware will disguise itself as a light bulb. 

  • Devices supported by SONOFF Zigbee Dongle Plus

    SONOFF Dongle Plus MG24 works great with most Zigbee devices, including popular brands like Sonoff, Aqara, Philips Hue, Huawei, IKEA, Tuya, and many more, mainly depending on the home automation platform on which the user uses Dongle Plus:

    ZHA: https://www.home-assistant.io/integrations/zha

    Zigbee2MQTT: https://www.zigbee2mqtt.io/guide/supported-hardware.html

    ioBroker: https://github.com/Jey-Cee/ioBroker.deconz

    Domoticz: https://github.com/Smanar/Domoticz-deCONZ

    OpenHAB: https://www.openhab.org/addons/bindings/deconz/

    Jeedom: https://compatibility.jeedom.com/index.php?v=d&p=home&protocol=Zigbee

    In addition to check the supported devices through the official platform, you also can view Blakadder compatibility lists which provides an extensive overview of the devices supported by different platforms. 

  • What is the difference between Dongle-PMG24 and ZBDongle-P?

    In addition to the difference in appearance, Dongle-PMG24 and ZBDongle-Pare the chip and the supported platform. 

    Dongle-PMG24 uses EFR32MG24 while ZBdongle-P uses CC2652P, and ZBDongle-E supports openHAB but ZBDongle-P doesn't support it yet. 

  • Can I run 2 Dongles with ZHA simultaneously?

    No. Users can only add one ZHA integration to Home Assistant (but HA can connect to multiple deCONZ or Zigbee2MQTT instances).   

  • What is the difference between Dongle-PMG24 and ZBDongle-E?

    The main differences between ZBDongle-P and ZBDongle-E are the chip and the supported platform. ZBdongle-P uses CC2652P while ZBDongle-E EFR32MG21, and ZBDongle-E supports Openhab but ZBDongle-P doesn't support yet.

    Dongle Plus MG24 (Dongle-PMG24) is the upgraded version of the current ZBDongle-E, moving from the EFR32MG21 chip to the EFR32MG24. The chip's flash has increased by 100% and RAM by 300%, while standby power consumption is lower. In addition, the housing is more compact, making it easier to fit into different USB ports. 

  • Can I run 2 Dongles with ZHA and Zigbee2MQTT on the same machine together

    Yeah, you can run two dongles at the same time. One in ZHA, the other one in Z2M, as long as you can uniquely identify them on the USB ports and keep separate Zigbee channels, ZHA defaults to 15, Z2M defaults to 11. 

  • Can I run Zigbee2MQTT and ZHA together on the same Dongle Plus MG24?

    No. Z2M and ZHA are the same protocol (Zigbee). You can run one or the other, or buy a second dongle and run both on separate dongles.  

Dongle-PZG23

  • What is the purpose of the USB extension cable?

    We strongly recommend using a USB extension cable between your USB port and the dongle to reduce electromagnetic interference that may come from USB 3.0 ports, ensuring more stable communication. 

  • Which Z-Wave sub-devices are supported? How should I purchase Z-Wave devices?

    You can choose compatible products from the Z-Wave certified device list provided below. Please note that Z-Wave frequency requirements vary by country or region. Make sure to purchase Z-Wave devices that match your local frequency from your local Amazon store or other regional shopping platforms. 

  • Can I use a Zigbee dongle and a Z-Wave dongle on the same device simultaneously?

    Yes, they can be used together. 

  • Does the Z-Wave 800 Dongle Plus support firmware flashing?

    It only supports flashing firmware provided by SONOFF. 

  • Can I run two Z-Wave dongles on Home Assistant at the same time?

    You cannot run two Z-Wave adapters using the same integration. If you use only one integration, you would need to migrate the network. If you want to run two adapters simultaneously, you must install a second integration, such as Z-Wave JS UI. 

Dongle-MZG23

  • Does the Z-Wave 800 Dongle Max support firmware flashing?

    It only supports flashing firmware provided by SONOFF.

  • Can I run two Z-Wave dongles on Home Assistant at the same time?

    You cannot run two Z-Wave adapters using the same integration. If you use only one integration, you would need to migrate the network. If you want to run two adapters simultaneously, you must install a second integration, such as Z-Wave JS UI.

  • What's the difference between Dongle-MZG23 and Dongle-M?

    They support different protocols: Dongle-MZG23 is mainly used for adding Z-Wave devices, while Dongle-M is designed for adding Zigbee or Thread devices.

  • Can I run a Z-Wave Dongle and a Zigbee Dongle on Home Assistant at the same time?

    Yes, they can be used together.

  • Which Z-Wave sub-devices are supported? How should I purchase Z-Wave devices?

    You can choose compatible products from the Z-Wave certified device list provided below. Please note that Z-Wave frequency requirements vary by country or region. Make sure to purchase Z-Wave devices that match your local frequency from your local Amazon store or other regional shopping platforms. https://products.z-wavealliance.org/

Dongle-PP10

  • What is the function of the USB extension cable?

    The Dong Plus CC2674P10 package includes a 1m USB extension cable. It helps the Dongle connect to USB ports in different positions more easily and reduces interference.
  • What is the difference between Dongle-PP10 and ZBDongle-P?

    Dongle Plus CC2674P10 (Dongle-PP10) is the upgraded version of the current ZBDongle-P, moving from the CC2674P10 chip to the CC2652P. The chip's flash has increased by 300% and RAM by 300%, and the MCU processor has stronger performance.

    In addition, the housing is more compact, making it easier to fit into different USB ports.

  • How to check the firmware of SONOFF Dongle Plus CC2674P10 and flash the firmware?

    You can use the official Sonoff Dongle Flasher web tool to check for the latest firmware and flash your device.

     

  • How to flash Dongle Plus CC2674P10 as Router?

    Dongle Plus CC2674P10 is pre-installed with coordinator firmware, which can only be used to add sub-devices and cannot be added by other gateways (the Zigbee protocol stipulates that there can only be one gateway in each Zigbee network).

    If you need to expand the Zigbee signal range, you can flash the router firmware using the SONOFF Dongle Flasher web tool. Dongle Plus CC2674P10 running routing firmware will disguise itself as a light bulb.

  • Can I run 2 Dongles with ZHA simultaneously?

    No. Users can only add one ZHA integration to Home Assistant (but HA can connect to multiple deCONZ or Zigbee2MQTT instances).
  • Can I run Zigbee2MQTT and ZHA together on the same Dongle Plus CC2674P10?

    No. Z2M and ZHA are the same protocol (Zigbee). You can run one or the other, or buy a second dongle and run both on separate dongles.

  • Can I run 2 Dongles with ZHA and Zigbee2MQTT on the same machine together?

    Yeah, you can run two dongles at the same time. One in ZHA, the other one in Z2M, as long as you can uniquely identify them on the USB ports and keep separate Zigbee channels, ZHA defaults to 15, Z2M defaults to 11.

  • Devices supported by SONOFF Zigbee Dongle Plus

    SONOFF Dongle Plus CC2674P10 works great with most Zigbee devices, including popular brands like Sonoff, Aqara, Philips Hue, Huawei, IKEA, Tuya, and many more, mainly depending on the home automation platform on which the user uses Dongle Plus:


    ZHA: https://www.home-assistant.io/integrations/zha

    Zigbee2MQTT: https://www.zigbee2mqtt.io/guide/supported-hardware.html

    ioBroker: https://github.com/Jey-Cee/ioBroker.deconz

    Domoticz: https://github.com/Smanar/Domoticz-deCONZ

    OpenHAB: https://www.openhab.org/addons/bindings/deconz/

    Jeedom: https://compatibility.jeedom.com/index.php?v=d&p=home&protocol=Zigbee

    In addition to check the supported devices through the official platform, you also can view Blakadder compatibility lists, which provides an extensive overview of the devices supported by different platforms.

  • What are the baud rates for the official firmware?

    Dongle-PP10

    • Zigbee NCP: 115200, 460800, 921600
    • Zigbee Router: 115200
    • OpenThread: 460800, 921600
  • How can I add a Thread device using the Dongle-PP10?

    The Dongle Plus CC2674P10 uses TI's flagship Zigbee and Thread chip, the CC2652P. It requires flashing the Thread RCP firmware and connecting to a host running OTBR for installation and configuration to set up a Thread network.

  • Can I quickly migrate the existing configuration for the older ZBDongle-P in HA to the Dongle-PP10?

    Yes, one-click migration is supported between Adapters (i.e., dongles) using Silicon Labs and Texas Instruments chips, but only for the ZHA integration configuration. For Z2M integration, migration is supported but requires backup and restore functionality. Configurations for OTBR are not supported for migration. Whether migration is possible depends on the open-source platform itself, not on the device's own capabilities.
    How to perform one-click migration in ZHA integration: Zigbee Home Automation

    How to migrate in Z2M integration: FAQ | Zigbee2MQTT