WEB Console Feature Introduction

Accessing the WEB Console #

The device supports the following methods to access the WEB console.

Access MethodDescription
Default Domain AccessConnect to the same local network as the device, then enter the default domain name Dongle-MZG23.local in the browser.
IP Address AccessQuery the device's IP address in the router's backend, then enter the IP address in the browser.
Custom DomainIf it is not the first login and an mDNS domain name has been set in the WEB console, you can access via the custom domain name.

Login Page #


Login Setup #

On first use, you must set a password with at least 8 characters.

*If using AP Hotspot Configuration, you will need to reconnect to the AP hotspot after changing the password, using the newly set password.

Interface Settings #

Click the button in the upper-right corner to expand the interface settings menu. You can modify the following:

Interface Color: Change the theme color of the interface.

  • Light Mode (white)
  • Dark Mode (black)
  • Device Default (Follow System)

Language: Change the interface language, currently supporting English and Chinese.

FAQ: Redirects to the knowledge base to view frequently asked questions.

About Us: Redirects to the knowledge base to view manufacturer and device information.

Forgot Password #

If it is not the first login and the password is forgotten, click Forgot Password. Then, within 10 seconds, double-click the device button as prompted. You will then have 5 minutes to set a new password.

Device Overview #


The device overview displays the current overall information of the device.

Icon Description #

Network Method: Shows the current network in use. If both Wi-Fi and Ethernet are connected, Ethernet is prioritized.

AP Hotspot Status: Whether the AP hotspot is enabled.

EFR32ZG23 Mode: Indicates whether the Z-Wave firmware is enabled and running properly.

TCP Status: If the icon appears, it means that TCP connection is enabled now.

eWeLink-Remote: Current number of eWeLink-Remote device connections.

Message Notifications: Click to enter the message notification page.

Network Settings #


In the network settings, you can view the current network mode and modify network configurations.

AP Settings #

AP On/Off: Whether to enable the AP hotspot connection feature.

  • Enable: The AP hotspot can be searched and added, then the WEB console can be opened in the browser.
  • Disable: The AP hotspot cannot be searched.

Internet Connection: After the device is connected to the Internet, enabling this function allows IoT devices to connect to the Internet.

This feature uses the dongle as a network AP to extend Internet coverage for IoT devices, but connecting high-traffic devices such as phones or tablets is not recommended.

AP Information: View the AP SSID or change the password.

Ethernet Settings #

IP Configuration: Supports switching between the following modes:

  • DHCP: IP address assigned by the router
  • Manual Input: Define IP address, subnet mask, gateway (router), DNS1, DNS2
  • Smart IP (default): The first IP assigned by the router is saved as a static IP

About Smart IP:

Keeps a stable IP to prevent disconnection in ZHA or Z2M caused by changing IP addresses after router reboots.

  • Record the IP address assigned by the router when you first connect to the Internet as a Smart IP

WLAN Settings #

SSID: Scan nearby Wi-Fi, supports adding 2.4G Wi-Fi.

If both Ethernet and Wi-Fi are connected, Ethernet is prioritized.

IP Settings: Supports switching between the following modes:

  • DHCP: IP address assigned by the router
  • Manual Input: Define IP address, subnet mask, gateway (router), DNS1, DNS2
  • Smart IP (default): The first IP assigned by the router is saved as a static IP

MQTT #


Directly view or control Dongle settings in Home Assistant or other third-party platforms.

Click here to view detailed settings about MQTT.

Webhooks #


Set up webhooks to send notifications/backup files to a specified URL.

Click here to view detailed settings about webhooks.

WireGuard #


Supports VPN remote access to Home Assistant or Zigbee2MQTT servers.

Click here to view detailed settings about WireGuard.

Wi-Fi Channel Energy Scan #


This feature detects Wi-Fi energy level to help judge signal quality.

Scan takes about 30s, during which TCP/Socket connections may drop.

Wi-Fi channels range from 1–13. Higher energy levels indicate better channel status.

Switch Wi-Fi Channel:

  1. If connected via Ethernet: Wi-Fi channels will automatically avoid Zigbee interference (no manual action needed).
  2. If connected via Wi-Fi: Channels can be modified in the router's backend.

eWeLink-Remote Gateway #

When you have a SONOFF eWeLink-Remote Sub-Device (R5, S-MATE series), you can integrate it into open-source platforms via MQTT.
*MQTT must be configured before using this feature.

Firmware Management #


View current firmware information and update settings.

Upgrade Firmware #

Choose available stable/test firmware from Check for Updates, or Upload & Flash Firmware to install third-party firmware.

Security & Backup #


Manage WEB access password and whitelists.

Change Login Password #

Supports resetting the WEB access password. Minimum 8 characters.

IP Whitelist #

When enabled, permit connections exclusively from trusted Z2M/ZHA IPs.

Backup & Restore #

Supports downloading and uploading backups. Only local backup files can be used.

Automatic Backup #

Requires setting up webhooks to periodically send device backups to a specified URL.

Settings #


Manage various device settings or view related documents.

General Settings #

Device Name: Display name of the device, customizable.
mDNS Domain: Device access domain, default is Dongle-MZG23.local, customizable.
About Us: View more official information.
Find Device: Makes the device indicator blink yellow for 10 seconds. It helps you find the device in a dark environment or find the correct one among multiple devices.

System Settings #

Time: Current device time and timezone. Supports auto-detection and setting NTP server.
NTP server provides accurate reference time for devices.

Language: Change UI language, supports 2 languages (Chinese, English).

UI Mode: Change the theme color of the interface.

  • Light Mode (white)
  • Dark Mode (black)
  • Device Default (Follow System)

LED Indicator: Manage indicator light behavior.

  • Enable/Disable LED Indicator
  • Night Mode (Disable the LED indicator during the scheduled duration)
  • Customize brightness/colors for various states:
    • Power on / USB-C Port Connected: Network Disconnected
    • WPS pairing (Flashing)
    • Network Connected
    • Network error (Flashing)
    • Find Device

Debug Logs: Please attach the Debug log file when reporting the issue for better analysis. To do that, enable Debug logs, reproduce the issue, then disable it to download the log automatically.

Feedback #

Enter the SONOFF Dongle page for technical support or feedback.

Reboot Options #

Choose to reboot in the following three ways:

  • Reboot ESP32-D0WDR2-V3
  • Reboot EFR32ZG23
  • Reboot Dongle-MZG23

Factory Reset #

Once confirmed to reset to the factory settings, Dongle-MZG23 will erase all data and restore default configurations.

What are your feelings

Updated on May 28, 2026