Step Overview #
For first-time use, you can refer to the steps below to track your setup progress.
| Step | Ethernet Method | Wi-Fi Method | USB Method |
|---|---|---|---|
| 1 | Install Antenna | ||
| 2 | Ethernet Power and Connection | Wi-Fi Power and Connection | USB Power and Connection |
| 3 | WEB Console First Time Setup | / | |
| 4 | Connecting to the Open-source Platforms (TCP) | Connecting to the Open-source Platforms (USB) | |
| 5 | Fixed the Device | ||
Once the basic setup is complete, refer to the following documents to explore more device capabilities:
- How to migrate the Dongle in Z-Wave JS?: Z-Wave Coordinator Migration
- How to upgrade firmware?: Firmware Flashing Guide
- How to use MQTT?: MQTT Usage Guide
- How to push notifications?: Webhooks Usage Guide
- How to remotely access the WEB Console?: WireGuard Usage Guide
Antenna Installation #
The package includes two antennas, which should be attached to the left and right sides of the device respectively.

Fixed the Device #
After the device is working properly, you can choose one of the following methods to fix the device:
1. Desktop placement (Double-sided tape can be used to fix the device to the desktop).

2. Use screws to secure the bracket, then mount the device onto the bracket.
