Step Overview #
For first-time use, you can refer to the steps below to track your setup progress.
| Step | Step-by-step Instructions |
|---|---|
| Start | Install Antenna |
| 1 | Ethernet Connection Wi-Fi Connection USB Connection |
| 2 | WEB Console First Time Setup |
| 3 | Connecting to the Open-source Platforms ZHA | Z2M |
| Finish | Fixed the Device |
Once the basic setup is complete, refer to the following documents to explore more device capabilities:
- How to migrate the Dongle in ZHA or Z2M?: Zigbee Coordinator Migration
- How to upgrade firmware?: Firmware Flashing Guide
- How to use MQTT?: MQTT Usage Guide
- How to push notifications?: Webhooks Usage Guide
- How to remotely access the WEB Console?: WireGuard Usage Guide
Antenna Installation #
The package includes two antennas, which should be attached to the left and right sides of the device respectively.
Fixed the Device #
After the device is working properly, you can choose one of the following methods to fix the device:
1、Desktop placement (Double-sided tape can be used to fix the device to the desktop).
2、Use screws to secure the bracket, then mount the device onto the bracket.
